Bowers Marine
5133 Kutztown Road ,
Temple Pennsylvania, 19560
Tel:610-929-9444
Mako 19-CPX - main image

2019 Mako 19 CPX

Year 2019
Length 18'10 ft

The MAKO® 19 CPX is a bay-busting beast, with an overbuilt fiberglass hull engineered to handle the hardest chop. There's a huge front deck with ample storage, a fully appointed console, two onboard coolers and two flip-up jump seats in the aft deck for passengers. So whether you’re stalking the saltgrass for reds or pulling cobia off a wreck just offshore, you’ll find that the 19 CPX has got a perfectly calculated balance of power and finesse that will get you out with the crew and in with the fish in supreme confidence.

Specifications

Year Built 2019
Category Power
Length Overall 18'10 ft
Beam 7'9 ft
Number of Passengers 5
Construction Fiberglass
Deadrise Angle 15 deg
Min Draft 1 ft
Fuel Tank Cap. 47 gal
Dry Weight 1900 lb
Additional Specs
  • Length:18' 10"
  • Beam: 7' 9"
  • Bottom width: 6' 8.5"
  • Max. recommended HP (single): 150 HP
  • Fuel capacity: 47 gal.
  • Max. person capacity: 5 persons
  • Max. person weight: 720 lbs.
  • Max. person, motor & gear weight: 1500 lbs.
  • Interior depth: 18"
  • Transom height: 25"
  • Deadrise: 15 degrees
  • Draft: 12"
  • Dry weight: 1900 lbs.
  • Average hull weight: 2500 lbs.
  • Average package weight: 3000 lbs.
  • Package height: 9' 2"
  • Storage length: 22' 11"
Standard Features

Certification & Safety

  • Backed by MAKO® Assurance 5+Life—the best factory warranty in the business
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance
  • Fire extinguisher
  • Horn

Console

  • Elevated fiberglass console
  • Stainless steel destroyer-style steering wheel
  • SeaStar™ hydraulic steering
  • Analog tachometer, fuel gauge & water pressure gauge
  • Binnacle-mounted remote motor control w/power trim switch
  • Battery/gear storage
  • Removable 72-qt. (68 L) forward-console cooler/seat w/integrated cushion
  • Heavy-duty anodized aluminum grab rail
  • Contoured acrylic windscreen
  • Area to flush- & surface-mount additional electronics
  • 2 stainless steel drink holders w/drainage system

Construction & Exterior

  • 100% composite construction
  • Encapsulated, fiberglass-infused transom w/high-density Coosa® Bluewater composite core
  • Molded, patterned non-skid casting platforms & cockpit sole
  • Console chemically bonded & mechanically fastened to deck w/.25" (.6 cm) aluminum backing plates
  • Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
  • Integrated 1-piece molded, gelcoated fiberglass stringer grid system w/gelcoat finish & fully injected w/closed-cell foam for USCG-approved flotation
  • High-density, fiberglass-infused trolling motor mounting core
  • Marine-grade stainless steel hardware & fasteners throughout
  • Gelcoat finish on all bulkheads & compartment interiors
  • Self-bailing cockpit
  • Composite seat substrates
  • Heavy-duty rub rail
  • MAKO® Bone White gelcoat

Electrical, Mechanical & Plumbing Systems

  • Integrated EPA-compliant fuel system w/rotocast corrosion-free fuel tank
  • 1,000 GPH (3,785 LPH) bilge pump w/auto switch
  • 600 GPH (2,271 LPH) baitwell pump w/adjustable spray head
  • High-speed raw water pickup
  • USCG-compliant navigation lights
  • Interstate® cranking battery w/tray
  • 6-circuit ATO/ATC distribution fuse block
  • Marine-grade rocker switches w/push button breaker protection
  • Marine-grade tinned wiring w/submersible connectors
  • 12V outlet

Hardware & Accessories

  • Six 6" (15.24 cm) stainless steel cleats
  • Powder-coated transom reinforcement plate w/MAKO® logo
  • Stainless steel & bronze thru-hull fittings
  • Stainless steel bow & stern eyes
  • Stainless steel fuel fill

Interior

  • Anchor locker
  • 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • 360° fishability
  • Port & starboard bow storage boxes w/stainless steel latches
  • Large bow in-deck storage
  • In-floor locker w/recess for cast net bucket storage
  • Flip-flop helm seat w/72-qt. (68 L) cushioned cooler
  • Aft port & starboard jump seats
  • Closed-molded laminate hatch covers w/finished undersides
  • Starboard stowage for 4 rods
  • Lighted aft 28-gal. (106 L) baitwell

Performance

  • Legendary dry-riding MAKO® hull design
  • Factory-rigged w/matched propeller

Trailer

  • Custom aluminum single-axle trailer
  • Swing-up locking jack w/swivel wheel
  • Aluminum construction
  • Space-saving swing-away tongue to reduce storage length
  • Stainless steel hardware
  • Galvanized steel components